>

Archive for July, 2010

How To Install Concrete Anchor Bolts

July 28th, 2010

Anchor bolts are used to attach structures such as buildings or objects to concrete, the purpose of which is to keep it in place. There are many types of these that are trademarked by manufacturing companies, but all consists of threaded ends where a nut and washer are attached. Proper installation of concrete anchor bolts is very crucial to a building. If improperly done by the contractors and structural engineers, issues with the integrity of the building and strength ratings will arise.

In order for the installation to be done properly, collaboration between contractors and engineers is important, as well as utilizing the appropriate hardware as per the engineer’s plans. Basic installation involves drilling a hole the same size as the bolt shaft then inserting it in. That’s it.

However, there are different bolts for different application; therefore, installing these varies slightly. Here are two samples:

Drop-in anchors are used in applications that are medium to heavy-duty. They come in different kinds of steels such as zinc-plated carbon. It consists of a tubular expansion shield that is paired with a solid, cone-shaped expander plug. Installation procedure is as follows:

1. Using a hammer drill with a matching drill bit the size of the outer diameter of the anchor, drill a hole in the concrete that is deeper than the anchor length.

2. Make sure the hole is clear of debris and particles.

3. Place in the anchor in the hole with the slotted ends inside.

4. Using the right-sized setting tool, insert it into the anchor and set it by hammering. You will know that it has been set properly when the shoulder of the tool is even with the top of the anchor. » Read more: How To Install Concrete Anchor Bolts

Mold And Mildew Removal From Your Bathroom

July 19th, 2010

Everybody knows what it is and have encountered it once in their lifetime: mold. The most common place to find mold and mildew is your bathroom. A
bathroom has the perfect ingredients for mold to grow in; it is warm, dark and moisture. What a lot of people do not know is that mold and mildew is
toxic and can cause some really bad health effects. It is therefor necessary to remove mold and mildew out of your bathroom.

First it is case to identify mold for those among us that do not know what i am talking about so far. Mold can have many colors because there are several
different mold types. You can identify mold and mildew by the dark spots that are growing on your grout.

After identifying the problem you need to learn about the source of the problem before you can remove it. Unfortunately it is not as simple as
removing the mold on the walls because then it will come back. For example when you use bleach for mold and mildew removal you will remove it but it only will be temporarily. So look further, does your bathroom have enough air circulation in it? Does it have a ventilator? If the answer is yes, does the ventilator work properly? Many bathroom that not have a ventilator does have a window in it. Make sure you open this window after and during
showering or a bath so fresh air help dry the room.

If you are going to buy a mold remover make sure to buy an organic one. Organic mold removers work better then ones with chemicals in them, the organic ones clear and prevent while chemicals only clear. Maybe the best solution for mold and mildew removal is a organic natural cleaning product combined with molderizer. » Read more: Mold And Mildew Removal From Your Bathroom

Tips On Using A Roof Ladder Safely

July 15th, 2010

Your roof sheets might be leaking, your gutters clogged with leaves and branches, or a few tiles might have been blown away during hurricane Katrina. Whatever the case may be you will one day have to face the daunting prospect of having to use a roof ladder so that you can maintain your home. Because people have actually died due to inadequate safety precautions when using ladders it becomes very important for you to read this.

Before hopping excitedly onto the ladder you must make sure that all bolts, hinges and rungs are intact and properly fastened. Loose screw bolts and hinges can easily render a ladder wobbly, thereby exposing you to the scary possibility of falling head first onto the solid ground. So take your screw drivers a day before the job and make sure you fasten screws to prevent falling off the ladder. » Read more: Tips On Using A Roof Ladder Safely

How To Locate A Company To Install Surveillance Cameras

July 8th, 2010

If you are a business owner you probably realize that people can steal items from you at any time. However, if you have surveillance cameras put into your business it could help you catch the people that are going to be stealing from you. If they do not catch the people though the tapes could help the police find them.

If you are going to have any of these though you are going to make sure that you find out the cost first. These items are going to vary greatly in cost and you will want to find a deal to help you save money on these items.

A great place to look at would be security companies that near your business. By finding out if any are present in your area you can find if they can put these in for you. If they do these you might even be able to find out if they provide any monitoring of these as well.

If you are handy with your computer you might want to consider looking at the various results on the pages that can be found from the search engines. By using this you are going to find many companies around that do this, but you will want to make sure that you find one in your region to help you with the problem without having to have a tech sent out from several hundred miles away.

Other business owners could be a source for you to talk to as well. By checking with them they can tell you who they used to put in theres and how the service was that they got. » Read more: How To Locate A Company To Install Surveillance Cameras